MR Safe Response Devices / fORP / 2 & 4 Button Response Devices / 4 Buttons Curved Right
4 Buttons Curved Right
The fMRI response pad is the perfect choice for computer response tasks used in the human brain mapping project. It is non-magnetic, non-electronic, and entirely made out of plastic, so will not add noise to the images or raise safety concerns in the MR/MEG room or similarly demanding environments.
Guide Price: £1100
SKU: N1350
- Four 0.42 in. (1.1 cm) colored round buttons (blue, yellow, green and red)
- Curved right line with 1.03 in. (2.6 cm) button spacing center to center with the blue and red buttons offset 0.125 in. (0.3 cm) to the left, and the yellow and green buttons offset 0.125 in. (0.3 cm) to the right
- Rectangular enclosure 1.0 x 5.1 x 2.5 in. (2.5 x 13 x 6.4 cm)
- 10 foot long fiber pigtailed connector
- Active light levels for handheld identification and gain adjustment
This response pad can be purchased separately, but needs to be used with one of the 900 series electronic interfaces, and appropriate cables. The easiest way to get started is by choosing it as part of the 904 package, 905 package or 932 package, which contain everything you need.
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
fORP 904 Subject Response Package
The low cost PKG-904 is the easiest way to get started with... more »
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response pad is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response stick is non-magnetic, non-electronic, and entirely made out of... more »
-
The fMRI response stick is non-magnetic, non-electronic, and entirely made out of... more »